
Promax
Pump Cover Small
- Size
- Small, 7 colours
- Does
- Weather and noise
- Suits
- No pressure tank
Vented cover with base, seven colours. Pump without pressure tank.
$299.00incl GST
View productThe accessories tank owners buy most, first: pump covers in seven colours, the Tank Level Indicator, then the outlets, seals, rain heads, filters and cleaning gear that go with a Promax tank.
Pictured, our best seller
Pump Cover Small
Where do you need it?
Start with the job. The groups run in the order customers buy them, pump covers and level gauges first.

Get it to the house
Vented covers in seven colours, small or large. Pumps and mains backup switches live on their own page.

Know how full it is
A dial on top of the tank or a sight glass down the side, so nobody is tapping the wall to guess the level.

Fit out a new tank
Outlets, seals, valves and lids. The kits bundle what a standard install needs so nothing gets left at the merchant.

Keep leaves out
Rain heads and first flush diverters that stop leaves, grit and roof wash before they reach the tank.

Link tanks or draw cleaner water
Balance two tanks so they fill and empty together, or draw from just below the surface where the water is cleanest.

Clean it out
Clear the sludge off the floor of the tank without draining it. Worth doing every couple of years, or after a dry spell.

Replace a lid
Screw-on replacement lids for the 450mm and 600mm manways, when the original has cracked or gone walkabout.

Make it drinkable
Whole house filtration, with or without UV, so what comes out of the tap is clear, tastes right and is safe to drink.
Not sure what you need?
Which tank, what the water is for, and what is already fitted. We will come back with a parts list and a price, usually the same day.
Or ring us on0800 77 66 29
Trusted by NZ homeowners, builders and specifiers since 1992.
Vented covers in seven colours, sized to the pump.

Promax
Vented cover with base, seven colours. Pump without pressure tank.
$299.00incl GST
View product
Promax
The bigger cover for a pump with a pressure tank beside it.
$480.00incl GST
View productSee how full the tank is without climbing it.

Promax
Float on a cord drives a dial on top. No power, no plumbing.
$299.00incl GST
View product
Promax
Clear tube down the outside. The tube level is the tank level.
$220.00incl GST
View productOutlets, seals, valves and lids: what goes through the wall of the tank.

Promax
Seals, valve, hose and fittings from tank outlet to pump.
$199.00incl GST
View product
Promax
The Fitting Kit plus a Tank Level Indicator, at a saving.
$499.00incl GST
View product
Promax
Gasket shaped to the ribbed ENDURO wall. Add a second draw-off.
From $75.00incl GST
View product
Wallace
Drill, push the seal in, push the pipe through. Five sizes.
From $60.00incl GST
View product
Promax
Quarter-turn, full bore, heavy brass. Nothing restricting flow.
From $449.00incl GST
View product
Promax
Handwheel isolation valve to 200 psi. Above-ground use.
From $412.00incl GST
View product
Promax
Required on any tank or tap not supplying drinking water.
$15.00incl GST
View product
Promax
Moves the ballcock inside the tank so it cannot freeze solid.
$800.00incl GST
View productJoin two tanks, or draw from the cleanest water near the surface.

Promax
Joins two tanks at the base so they act as one volume.
$369.00incl GST
View product
Promax
Float keeps the intake just below the surface, clear of sediment.
From $199.00incl GST
View productClear sediment off the floor of the tank without draining it.

Promax
Tank Vac plus Floating Outtake, bundled at a saving.
$799.00incl GST
View product
Promax
Plumbed to the overflow; sucks the floor clean each time it overflows.
$700.00incl GST
View productStop leaves, grit and roof wash before they reach the tank.

Rain Harvesting
Angled stainless mesh sheds leaves while the water drops through.
$85.00incl GST
View product
Rain Harvesting
Slim version for a 100mm downpipe. Same screen, less splash.
$99.00incl GST
View product
Promax
T junction, ball and drip-drainer. Add pipe to set the volume.
$99.00incl GST
View product
Promax
300mm chamber diverts a serious volume. Wall mount or in ground.
From $849.00incl GST
View product
Promax
Rain head and pipe seals, boxed together for a new install.
$185.00incl GST
View productScrew-on lids for the two Promax manway sizes.

Promax
Replacement screw-on lid for a 450mm manway.
$175.00incl GST
View product
Promax
Replacement screw-on lid for the 600mm manway on large tanks.
$190.00incl GST
View productWatts Hydroguard filtration, with or without UV, pre-assembled and ready to hang.

Watts Hydroguard
5-micron sediment then activated carbon. No power needed.
From $534.00incl GST
View product
Watts Hydroguard
Adds a UV chamber that kills 99.99% of bacteria. 5-year warranty.
From $2,635.00incl GST
View productPumping it to the house
Every pressure pump, submersible and pump kit we supply is on the Pumps page, with flow and head side by side and a selector that sizes one to your house. Mains backup switches live there too.
Pressure, submersible, variable speed, kits and mains backup
Every accessory on this page in one table, grouped the same way as above, with price.
Scroll the table sideways to see price.
| Product | Size or type | Does or fits | Suits | Price (incl GST) |
|---|---|---|---|---|
| Pump covers | ||||
| Pump Cover Small | Small | Weather and noise | No pressure tank | $299.00 |
| Pump Cover Large | Large | Weather and noise | With pressure tank | $480.00 |
| Level monitoring | ||||
| Tank Level Indicator | Dial | Any manway | Read from a distance | $299.00 |
| Sight Glass Kit | Sight glass | 10,000 to 30,000L | Read up close | $220.00 |
| Tank fit-out | ||||
| Tank Fitting Kit | 25mm fittings | ENDURO and XPRESS | Tank to pump | $199.00 |
| Tank Essentials Kit | Kit plus indicator | ENDURO and XPRESS | New tank bundle | $499.00 |
| Corrugated Tank Outlet | 25 / 50mm | ENDURO tanks | 34 / 60mm holesaw | from $75.00 |
| Pipe Seal | 65 to 150mm | Any poly tank | 76 to 168mm holesaw | from $60.00 |
| Brass Ball Valve | 80 / 100mm | Outlet or main | Full bore | from $449.00 |
| Gate Valve | 80 / 100mm | Outlet or main | 200 psi | from $412.00 |
| Non-Potable Water Sticker | Sticker | Any tank | Compliance | $15.00 |
| Frost Protection Kit 50mm | 50mm | Ballcock riser | Cold sites | $800.00 |
| Linking and draw-off | ||||
| Tank Balancing Kit 50mm | 50mm | Links two tanks | Multi-tank | $369.00 |
| Floating Outtake | 25 / 50mm | Surface draw-off | Cleaner water | from $199.00 |
| Cleaning and maintenance | ||||
| Tank Cleaning Kit | Vac plus outtake | Floor and intake | Cleanest supply | $799.00 |
| Tank Vac | Permanent | Automatic | Set and forget | $700.00 |
| Roof and downpipe | ||||
| Leaf Eater Rain Head 190 | 90mm downpipe | Leaf and pest screen | Standard downpipe | $85.00 |
| Leaf Eater Rain Head Stream 100 | 100mm downpipe | Leaf and pest screen | Slim profile | $99.00 |
| First Flush Diverter Kit 90mm | 90mm pipe | Diverts first flush | One downpipe | $99.00 |
| First Flush Diverter 120L | 100mm pipe | Diverts 120L | Large roofs | from $849.00 |
| Rain Collection Kit | 90mm | Rain head and seals | New install | $185.00 |
| Replacement lids | ||||
| Tank Lid, Screw Type 450mm | 450mm | 450mm manway | Replacement | $175.00 |
| Tank Lid, Screw Type 610mm | 610mm | 600mm manway | Replacement | $190.00 |
| Filtration and UV | ||||
| Whole House Water Filter | 110 L/min | 2 stage | Taste and clarity | from $534.00 |
| Whole House Water Filter with UV | 95 L/min | 3 stage with UV | Drinking water | from $2,635.00 |
Prices include GST. Products with sizes or mount options show the from price; the full price list is on each product page. Accessories ordered with a tank ship on the same delivery.
Questions
Sizing a diverter, matching a seal to a pipe, linking tanks, and whether the water is safe to drink.
Question not answered here? 0800 77 66 29
If you drink the water, yes. The first millimetre or two of rain washes the roof: dust, bird droppings, leaf tannin, whatever has settled since the last fall. A diverter catches that and lets the rest through.
Size it to the roof. A rule of thumb is 20 litres per 100 square metres of roof for a clean roof, more for one under trees. The 90mm kit handles a small roof; the 120L unit is for a full house roof or a dirty catchment.
They do different jobs. The rain head is a screen: it stops leaves, twigs and insects. The first flush diverter deals with what dissolves and what is too fine to screen.
Most tanks on a house roof want both: rain head at the top of the downpipe, diverter at the bottom. A stock water tank off a shed roof can get by with the rain head alone.
Match the seal to the pipe, then use the holesaw listed for that seal:
Standard NZ downpipe is 80mm or 90mm. Overflows on a large tank are usually 100mm.
The Tank Fitting Kit is the pipework between the tank and the pump: two 90mm pipe seals, reducing nipple, 25mm ball valve, two hose couplings, 2m of flexi suction hose and thread tape.
The Tank Essentials Kit is the same Fitting Kit with a Tank Level Indicator added, at a saving over buying them separately. Take it for a new tank: you need the fittings on day one and you will want to know the level on day two.
Join them at the bottom with the Tank Balancing Kit, so water moves freely between them and both read the same level. Run the downpipes into one tank and let the balance line fill the other.
Both tanks need to sit on pads at the same height. If they cannot, ring us: there are ways around it, but it needs a quick look at the layout.
Not reliably. A well-kept tank with a rain head and a first flush diverter produces good water most of the time, but it only takes one dead possum in the gutter or a dry spell with birds on the roof.
The Whole House Water Filter with UV takes the gamble out of it: sediment and carbon for taste and clarity, then UV to kill the bacteria. If the water is only for the garden, stock or washing, the filter is optional and the non-potable sticker is not.
Every two to three years for a household tank, or whenever the water starts to taste or smell off. A tank with a good rain head and a diverter upstream stays clean far longer.
Or fit a Tank Vac and stop doing it by hand. It sits inside the tank, plumbed to the overflow, and each time the tank overflows it sucks the settled debris off the floor and sends it out. The Tank Cleaning Kit bundles the Vac with a floating outtake so the intake draws from the cleanest water too.
Yes. Add them to the same order and they travel on the same truck, so everything arrives together and the plumber can start the day it lands. Accessories ordered on their own ship by courier.
On their own page. The Pumps collection has every pressure pump, submersible and kit we supply, with flow and head side by side, and a selector tool that sizes one to your house. Mains backup switches are on that page too. What stays here is what goes around a pump: covers and the collection kit.